How to Fix iPhone 12 Won’t Pair or Connect with Bluetooth

When you have a new iPhone 12, all you could think is to get new stuff loaded on your phone’s storage. You might think of transferring files from a different device using its Bluetooth feature, however, that could be hindered if your iPhone 12 won’t pair or connect with bluetooth. 

If you are one of those iPhone 12 users who are complaining that the bluetooth on their device is not working as it won’t pair or connect, find out how you can possibly deal with the problem by following the recommendations on this post. 

How to Deal with Bluetooth on iPhone 12 that Won’t Pair or Connect

If you are a new iPhone user, connectivity issues such as bluetooth won’t pair or connect is almost a normal issue on iOS devices. A lot of users have been complaining with this issue even with the older iPhone models. But most of the cases have been resolved immediately as they are only caused by minor software glitches. 

What you will find below are basic troubleshooting procedures that would help in eliminating this connectivity problem on your new iPhone. Read further and find out how you can fix the iPhone 12 won’t pair or connect with bluetooth. 

First Solution: Reset/Restart your iPhone 12

Bluetooth connections can be affected by a minor bug when the phone has been used for an extended period. Turning off your iPhone 12 and turning it back on should give the refresh that it may need to resolve the problem. 

  1. Press and hold the Power/Side button and either of the Volume buttons simultaneously for a few seconds. 
  2. Release both buttons once the Slide to Power off prompt appears on the screen.
  3. Drag the Power off slider to the right to turn off your phone.
  4. After 30 seconds, press and hold the Power/Side button again until you see the Apple logo.

Once the phone has fully restarted, enable bluetooth connections and test if it will connect or pair already.

Second Solution: Enable and Disable Airplane Mode on your iPhone 12

Connection glitches can be resolved right away if you will cut off the radio connection on your iPhone for a moment. Enabling the airplane mode does that job in turning off connections on your iPhone, including bluetooth. It is an effective way in dealing with multiple connection errors. 

  1. Access Settings from the Home screen. 
  2. Check Airplane mode. If toggle is currently turned on, tap on it to switch it off. If not, tap the toggle to turn it on.
  3. While the Airplane mode is enabled, perform a soft reset on your device. 
  4. Wait for your phone to go back online after the reset then access Settings > Airplane mode. Tap the switch to disable the feature. 

You can also access the airplane mode shortcut on your control center. Test our bluetooth connectivity right after disabling the airplane mode to see if your iPhone 12 won’t pair or connect with bluetooth up to this point.

Third Solution: Reset Network Settings on your iPhone 12

When connectivity errors arise, this could be an indication that there’s something wrong with your phone’s network settings configuration. Performing a reset network settings procedure helps in eliminating misconfigured settings that may have been causing the iPhone  won’t pair or connect with bluetooth. It reverts them to their default values and options without deleting your personal information. 

  1. Access Settings from the Home screen. 
  2. Tap General.
  3. Scroll down to and then select Reset
  4. Tap the Reset Network Settings option.
  5. Enter your device passcode once prompted.
  6. Then tap to confirm network settings reset.

Once the network reset is completed, attempt to pair your iPhone to other bluetooth devices and check if it pushes through.

Fourth Solution: Factory Reset your iPhone 12

Erasing all contents on the device might be a good way to clean up the mess caused by software bugs and glitches. Factory reset may be the answer that will help in resolving the bluetooth connectivity problem on your iPhone 12. Since you will lose all contents on the device including important files, create a backup first via iTunes or iCloud. 

One you have created a backup, follow the steps below to factory reset your iPhone.

  1. Access Settings from the Home screen. 
  2. Tap General.
  3. Scroll down to and then select Reset
  4. Tap the Erase all contents and settings option.
  5. Enter your device passcode once prompted.
  6. Then tap to confirm all settings reset.

Set up your iPhone 12 and check if the bluetooth error has been rectified.

Fifth Solution: Perform a Recovery Mode Restore on your iPhone 12

You might be looking at the procedure that will fix the bluetooth error on your iPhone 12 as this is an advanced solution used to cater major software glitches. You will need to prepare a Mac or Windows computer with the latest iTunes installed, a good internet connection on it and runs on the latest operating system that is compatible with your iPhone. 

If those are ready, connect your device to the computer using the Apple-supplied USB/lightning cable. Then allow iTunes to sync with your iPhone and backup files, if possible. Once the backup is secured, follow these steps to put your iPhone 12 in recovery mode and then restore iOS in iTunes:

  1. Press and release the Volume Up button quickly.
  2. Press and release the Volume Down button quickly.
  3. Then press and hold the Power/Side button once prompted with Connect to iTunes screen. Do not release the button when the Apple logo appears as you will need to enter recovery mode state.
  4. Once you enter the recovery mode, you’ll see either Update or Restore option.
  5. Select Restore if you want to reinstall and download iOS on your device without erasing data. 

Do not disconnect your phone from the computer and keep it connected until the entire restore process is finished. Once the procedure is done, test out your iPhone if it can pair or connect with bluetooth already.

Still Having a Bluetooth Won’t Pair or Connect Problem on iPhone 12

The issue might not be a minor one if the procedures above did not fix the iPhone 12 bluetooth won’t connect or pair issues up to this point. You will need an intervention with Apple experts to check your device and see what’s causing the problem. Bring your phone to the nearest Apple service center in your area and have it checked by an authorized technician. 

Also read: How to Fix iPhone 12 has Delayed Touchscreen Response

We also have a Youtube channel for troubleshooting guides if you have any other concerns. Feel free to visit it anytime and don’t forget to give our videos a thumbs up and subscribe to it. Thank you.